CEMS heating composite pipe
Products are used in pressure transmitters, process analyzers, continuous monitoring systems for atmospheric emissions, freeze protection, process temperature maintenance or high exposure temperatures.
Material standard
Stainless steel one ASTM A269 / ASTM A213 / ASTM A249 / ASTM A450 / ASTM B280
铜一ASTM B68/ASTM B75/ASTM B88/ASTM B251
Non-metallic one ASTM D3295/ASTM D3296
Companion pipes/process tubes
The stainless steel welded pipe should be completely annealed with 316 stainless steel and argon arc welded cold drawn wells. Pipe hardness or less than or equal to RB90, OD from 1/8" to 3/4", wall thickness of 0.028", 0.035" or 0.049"
The seamless stainless steel tube is cold-drawn and fully annealed with 316 stainless steel. Pipe hardness or less than or equal to RB90, stainless steel pipe outer diameter from 1/8" to 3/4", wall thickness of 0.028", 0.035" or 0.049"
The copper tube should be grade 122 softened annealed copper. Copper tubing with outer diameters from 1/4" to 3/4".
Teflon tubing is extruded with fluoropolymer resin. The fluoropolymer is PFA (Perfluoralkoxy). OD from 1/8" to 3/4", OD 1/8" with a minimum wall thickness of 0.030", OD 1/4" with a minimum wall thickness of 0.047", OD from 3/8" to 3/4" with a minimum wall thickness of 0.062".
Outer sheath
The outer sheath material is cold-resistant black UV-resistant polyvinyl chloride (ATPVC) and TPU polyurethane elastomer. Among them, polyvinyl chloride (ATPVC) is the standard sheath for instrument tubes. Polyethylene (PE) and rubber and plastic (TPE) outer sheaths are also available.
Maximum withstand temperature 221°F (105°C)
Minimum installation temperature -40°F (-40C)
The outer sheath has a nominal thickness of 0.20cm
Note: TPU is suitable for places where abrasion, impact resistance and good durability are required, and has stable aging resistance when exposed to high temperature and ultraviolet conditions.
Product specifications
Gauge tube outside diameters range from 1/8" to 3/4" in a variety of sizes.
The general length of the coiled product is 150m (except for high-power, high-temperature instrument tubes)
The product is available in a single copper tube with a length of 300m
A single high alloy tubing with a short length, an outer diameter greater than 3/4" or a small number of special needs can be supplied in length of 6m.
Note: The product can be cut arbitrarily according to the length of use, which improves the economy.
Electric heat tracing
Insulation
The insulation layer adopts moisture-proof glass wool insulation layer with chloride less than 50ppm and heat reflection tape. The insulation and heat reflective tape provide sufficient thickness to allow the surface temperature of the cable jacket to exceed 80°F (27°C) in a windless, 400*F (204°C) environment and a pipeline temperature of 140*F (60C).
Related products
Online consultation
Disclaimer:
1. The text descriptions used on this site are strictly in accordance with the provisions of the Advertising Law, and there are inevitably omissions. If any omissions are found, guidance is welcome, and we will correct them immediately.
2. Some of the pictures used on this site are collected from the Internet, and the copyright owner cannot be contacted. If you inadvertently infringe on the intellectual property rights of the copyright owner, please call and tell us, and this site will delete it immediately.
Service Hotline:
Address: East of Hucheng Road, Feidong Economic Development Zone, Hefei, Anhui
Electric Tracing Business Unit:
Electric Floor Heating Business Unit:
Marketing Service Department:
+86-13965109920 Mr. Li
Copyright ©2022 Anhui Huanrui Electric Heating Equipment Co., Ltd 皖ICP备08006463号 | Powered by www.300.cn | Tags | Business License